FYTTER runner RU-6X - Page 39

FYTTER |WWW.FYTTER.COM
PAG- 38
E04
A) Incline motor wire not well
connected.
Re-connect incline motor wire.
B) Incline motor broken.
Change new incline motor.
C) Pcb broken.
Change new pcb.
E05
A) Over-loaded.
Turn off and re-start machine.
B) Driving position hinder.
Adjust driving position, or add oil.
C) Motor short circuit
Change new motor.
D) Pcb burnt.
Change new pcb.
E10
A) Pcb torque too big.
Adjust torque to right position.
B) Motor short circuit.
Change new motor.
C) Driving position hinder.
Adjust driving position, or add oil.