15
Prog Change
Number
Functionality
1 Switch off the effect (the mode is defined by
OFF MODE switch position)
2 Switch off the effect in HARD mode
3 Switch off the effect in SOFT mode
4 Switch on the effect
5 to 128 Switch on the effect with delay time Pr.Ch. x 10 ms
The table below shows functionality of the Control Change commands.
Control Change
Number
Control Change Value
102 0-63 switch off the effect (the mode is defined by
OFF MODE switch position)
64-127 switch on the effect
103 4–127 delay time = Value x 10 ms +10 ms
80 (0 and 127 alternately) TAP TEMPO function
To Next Page
Loading...
