Need help?Do you have a question about the G-Rack Garage Shelving Units and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Adjustable Shelves | Yes |
| Assembly Required | Yes |
| Type | Garage Shelving Units |
| Color | Black |
| Total Loading Capacity | 875 kg |
Attach plastic feet to uprights and upright connectors to tops.
Add a second half upright to the upright connector using a mallet.
Insert a short side beam into the upright at the required shelf level.
Join the other end of the side beam to the other upright at the same height.
Continue adding side beams to create the side frame at preferred shelf heights.
Repeat steps 1-5 to create the second side frame, using the first as a template.
Add a long front and back beam to an upright at the lowest shelf height.
Slot the other end of the front/back beam into the second side frame at the same height.
Add the rest of the front and back beams connecting both side frames at matching heights.
Slot beam ties into the loops on front/back beams, ensuring secure attachment.
Place MDF boards onto the beams and beam ties at each shelf level.
Use unit connectors to fasten two shelving units together for stability.
To Next Page