GAC MOTOR All New GS8 - Page 150

144
5. Driving guide
Driving mode selection
1. Set the ENGINE START/STOP button to
“ON” position, and turn the D-MODE knob
up/down to switch the driving mode: “ECO
→COMFORT→DYNAMIC→SNOW*
→SAND*→MUD*→ECO...”.
2. On the AV system interface, click the
driving control panel key on the bottom
toolbar to view the current driving mode or
select the corresponding driving mode.
NOTE
Click the back button on the AV system
interface or stay for 5s without any operation
to hide the mode pop-up window.
If the D-MODE button on the center console is
turned, the AV system will pop up the “Driving
Mode” interface, and in this case, click “Current
Mode Setting” to set the current driving mode
parameters.
NOTE
If you want to memorize the current driving
mode, you need to enable the memory via
“Settings→DrivingAssistance→Driving
Prompt→CurrentDrivingModeMemory”in
the AV system. The current driving mode will
be defaulted to the next time you start the
vehicle.