GAC MOTOR All New GS8 - Integrated Cruise Assist (ICA)

169
5. Driving guide
5.4.3 Integrated cruise assist
(ICA)*
Integrated cruise assist is abbreviated as ICA.
ICA can automatically adjust the distance
from the vehicle ahead during cruise control
and keep the vehicle traveling in the middle of
the lane (hereinafter referred to as “steering
assist”) at the cruising speed of 0~130 km/h.
ACC detects the relative distance and speed
with the vehicle ahead in the same path
according to the signals from the MMW radar
installed on the front of the vehicle and the IFC
installed on the front windshield, and detects
the lane marking through the IFC.
ICA can improve driving comfort and provide
a more relaxing driving experience, such as
during long-distance driving in smooth traffic
on a highway.
NOTE
Precautions for use of radars and cameras.
=> See page 204
Operation instruction
- OntheAVsystem“Settings→ADIGO
IntelligentDriving→ADIGODriving
Assistance→CruiseAssistMode”
interface, select ICA to activate ICA or
ACC to deactivate ICA.
- After selected, ICA can be activated
according to the operation method of
ACC. => See page 159
NOTE
● Thecruisemodecanbechanged
regardless of the status of ACC,
including OFF/ON/Active.
● WhenICAhasaspecificfaultnot
affecting ACC, the cruise mode will
automatically jump back to ACC mode.
At this time, the driver cannot choose to
enter the TJA/ICA mode, but ACC can
still be used normally.
● TJA/ICAhascruisemodememory
function, so that the cruise mode the
same as that before last shutdown will
be selected after the engine is restarted.
Instrument cluster display interface
Please note the vehicle ahead
①
ACC indicator lamp:
- If the gray ACC indicator lamp
comes
on, it indicates that ACC is in the ready
state, and there is a target vehicle ahead;
if the blue ACC indicator lamp comes
on, it indicates that ACC is working, and
there is a target vehicle ahead.
- If the gray ACC indicator lamp
comes
on, it indicates that ACC is in the ready
state, and there is no target vehicle
ahead; if the blue ACC indicator lamp
comes on, it indicates that ACC is
working, and there is no target vehicle
ahead.