GAC MOTOR All New GS8 - Correct Installation of Child Safety Seat

31
3. Safety Operating Instructions
3.4.4 Correct installation of child
safety seat
The child safety seat is installed by three-point
seat belt, ISOFIX system, or LATCH system.
Toensureabetterprotectione󰀨ectandprevent
the headrest from affecting the performance
of the child safety seat during use, it is
recommended to remove the headrest of the
seat on which the child safety seat is installed.
NOTE
● Duringtheactualinstallationofthe
child safety seat, be sure to refer to the
instruction of the child safety seat for
correct installation.
● Forthesakeofsafety,pleaseadjustthe
rear seat (2nd row) with child safety seat
to the rearmost position.
Installation of child safety seat by three-
point seat belt
1. Place the child safety seat on the rear
seat (2nd row).
2. Pass the seat belt through the child safety
seat and fully insert the tongue into the
buckle until a click sound is heard.
Tab
3. Push the tongue down and pass the
shoulder belt through the slit on the side
of the child safety seat.