34
3. Safety Operating Instructions
NOTE
The rear anchorage
②
on the 2nd-row
seat is located in the middle of backside
of the seat back, and can be seen after
opening the protective cover.
The installation instructions of the LATCH child
safety seat are as follows.
1. Put the child safety seat on the seat, open
thecoverandndthefrontanchorage
①
.
Then insert the lower guide groove of the
child safety seat as arrowed into the front
anchorage
①
until a click is heard.
2. Thread the strap through the top of seat
back, open the protective cover of rear
anchorage
②
, and attach the strap hook
to the rear anchorage
②
with the strap
not twisted.
3. Tension the strap and shake the child
safetyseattoensureitisrmlyxed.
To Next Page
Loading...
