GAC MOTOR All New GS8 - Front Seats

92
4. Operation of systems and equipment
Height adjustment of front passenger’s
head restraint (for manual adjustment of
two-way head restraint)*
- Downward adjustment: Press and hold
the lock button
①
, and press down the
head restraint to the desired position.
- Upward adjustment: Lift up the head
restraint directly to the desired position.
NOTE
The adjustment method of second-row
head restraints is the same as that of third-
row head restraints*.
4.4.2 Front seats
NOTE
When measuring the depth of the seat
cushion, be sure to adjust the front and rear
positions of the seat to the middle of the
slide rail and the seat back to the normal
operating state (25°).
WARNING
● Donotplace objectsunderthefront
seats, for these objects may be caught
between the seat and the slider rail,
hindering the seat from being locked.
● Donotadjusttheseatswhenthe
vehicle is traveling as this is likely to
cause casualties. Therefore, please
adjust the front seat only when the
vehicle is in a stationary state.
● Neverleavechildrenalonein the
vehicle, because the power seat*
adjustment mechanism still works
after the ignition is switched to the
“OFF” position, and if the children
accidentally operate the power seat, it
may cause an accident.
Power seat
Forward and backward adjustment of seat:
- Push the switch in the direction of arrow
①
or
②
to adjust the seat to slide
forward or backward.
Upward and downward adjustment of seat (for
driver’s seat):
- Pull the switch in the direction of arrow
③
or
④
to adjust the seat upward or
downward.
Upward and downward adjustment of front end
of seat cushion (for driver’s seat)*:
- Pull the switch in the direction of arrow
⑤
or
⑥
to adjust the front end of the seat
cushion upward or downward.