100
4. Operation of systems and equipment
4.3.2 Interior lamps
Automaticlight-onfunctionofdomelamps
- When the switch
①
is pressed, the
button indicator lamp will light up, and the
automatic light-on function of the dome
lamps will be activated; When the switch
①
is pressed again, the button indicator
lamp will goes out, and the automatic
light-on function of the dome lamps will be
deactivated.
Delayofunctionofinteriorlamps
When the dome lamps are off and the
automatic light-on function of dome lamps is
activated:
- If the ignition is in the “OFF” position and
one of the doors is opened, the dome
lamps will come on automatically, and
then go out about 30 s after the doors are
closed.
- If the ignition is in the “OFF” position and
the doors are unlocked by remote control,
the dome lamps will come on automatically
and then go out after about 30 s.
- If the vehicle power switch is set from the
“ON” position to the “OFF” position, the
dome lamps will come on automatically
and then go out after about 30 s.
NOTE
When all the doors are closed and the
dome lamps are on as mentioned above,
if the vehicle is locked by remote control
or the vehicle power switch is set to the
“ON” position, the dome lamps will go out
automatically.
Dome lamp
- When the dome lamps are off and the
switch
②
is pressed, the button indicator
lamp will come on and all the dome
lamps will come on. when the switch
②
is pressed again, the dome lamps will go
out.
NOTE
The switch
②
will be invalid if it is not used
to turn on the front dome lamps.