GAC MOTOR EMPOW - Bluetooth Function

156
4. Operation of systems and equipment
4.6.9 Bluetooth function
Enter the Bluetooth mode in the following
ways:
- Click the “Bluetooth phone” soft key in the
application menu interface to enter the
Bluetooth mode.
- In non-call mode, press the
button on
the right side of steering wheel to enter
the Bluetooth mode.
- Click the soft key in the drop-down menu
to enter the Bluetooth mode.
- If there is no Bluetooth device connected,
use the above method to enter the

- After turning on the Bluetooth function by

, the IHU will automatically search for
nearby Bluetooth devices. The Bluetooth
connection interface displays two display
modes: “Radar” and “List”.
Radar display mode
- Bluetooth devices: Display the names
of nearby Bluetooth devices that can
be connected, select the devices to
be connected, and click to connect to
Bluetooth.
   
1
soft button to switch to the list mode, the
list mode displayed The number is the
number of Bluetooth devices that can be
connected to the periphery.
List display mode
- Bluetooth device: Displays the Bluetooth
devices that can be connected to the
periphery and displays them in a list style.
  
soft button switch to the list mode to
display the number of Bluetooth devices
that can be connected to the periphery.
After the Bluetooth connection, the status bar
icon will be highlighted, and the connected
Bluetooth device name will be displayed on the
Bluetooth connection interface:
- Click the
d
soft key to synchronize phone
numbers, contacts and other information.
- Click the
d
soft key to synchronize the
song name, lyrics and other information of
Bluetooth music.
- Click the
Disconnection
soft key again to disconnect
the Bluetooth.