GAC MOTOR EMPOW - Instruction for the Gear

177
5. Driving guide
WARNING
● Whenleavingthevehicle,theengine
mustbeturnedo󰀨,theparkingbrake
must be applied, and the vehicle key
must be carried with you key.
● Donotleaveanypersoninthe
vehicle.Otherwise,su󰀨ocation,coma
and even death can easily occur in
the closed space.
● Donotparknearflammableand
explosive materials.
5.1.4 Instruction for the gear
The gears of the gearshift lever are “ P, R,
N, D, M* “. When the power supply of whole
vehicle is in “ON” gear, the corresponding
gear information should be displayed on the
instrument cluster after the gear is switched.
- Push the gearshift lever forward and enter
the “R” gear from the “D” gear. There will

reached is at the “N” gear position and the
second is at the “R” gear position.
- Push the gearshift lever backwards and
enter the “D” gear from the “R” gear.
There will be two resistance points, reach
the first resistance point for “N” gear
position and reach the second resistance
point for “D” gear position.
WARNING
The “R” or “P” gear can be engaged
only when the vehicle is completely
stationary, otherwise the transmission
will be damaged.