188
5. Driving guide
NOTE
if the brake pedal is not released for
more than 3s, and the ejection function
will exit, and an alarm prompt of “clutch
overheating” or “ejection skill cooling”
may appear.
preparation for ejection start in place
on the accelerator pedal and brake
may occur.
please stop in a safe position to cool
down.
pulled up, the driver must wear a seat
otherwise the EPB will not automatically
unlock and the transmission will be
easily damaged.
WARNING
● Theejectionstartislimitedto
professional tracks such as
the proving ground. It is not
recommended to use it on public
roads. Please be sure to use this
function when permitted by relevant
laws and regulations and the
surrounding traffic conditions are
safe.
● Pleaseavoid usingthisfunctionon
wet and slippery roads, otherwise the
vehicle will lose control and cause
accidents.
CAUTION
Compared with normal starting, ejection
starting will increase the load of
transmission system related parts and
aggravate wear and deterioration. In order
to avoid affecting the service life of the
vehicle, please do not use it frequently.
5.1.8 Exhaust sound wave*
The user can switch the exhaust mode
through the interactive interface, and control
the opening of the tuning valve according to
the engine speed, throttle opening and gear
signals to realize continuous adjustment of
exhaust system acoustics and back pressure.
When the exhaust sound valve is opened, the
dynamic and pleasant exhaust sound can be
heard.
OnandO
Turn on or off the exhaust sound according
to different driving modes with the exhaust
sound button switch
①
on the right side of the
steering wheel.
To Next Page
Loading...
