GAC MOTOR EMPOW - Electronic Service Brake System; Esp (Esp)

196
5. Driving guide
Activation
When this function is enabled, it supports
automatic brake application and release under
stop & go conditions. When the driver brakes
the vehicle, the vehicle will be automatically
parked to avoid slide at startup.
Exit
Under the following conditions, AUTO HOLD
will be disabled and the parking brake will not
be locked:
1. The accelerator pedal is depressed at
startup.
2. The engine stops while the vehicle is
running.
3. The EPB is manually released.
4. The AUTO HOLD button is pressed when
the brake pedal is depressed.
For the sake of safety, the AUTO HOLD will be
disabled and the parking brake will be locked
under the following conditions:
 󰀨
2. The driver’s door is opened or the seat
belt is unfastened when the vehicle is
stopped.
3. The AUTO HOLD button is pressed to
disable AUTO HOLD.
CAUTION
When driving into a mechanism such as
a vehicle washing device that transports
the vehicle with a conveyor belt, be sure
to disable the AUTO HOLD, otherwise the
vehicle cannot move or may run off the
path.
5.3 Electronic service brake
system
5.3.1 ESP (ESP)
󰀨
OnandO󰀨

running. Press the

At this time, the
indicator lamp on the
instrument cluster will light up and the alarm
message will be displayed.