15
3. Instructions for safe operation
CAUTION
there are any heavy objects on the front
passenger’s seat to avoid the system
mistakenly determining that the seat is
occupied and issuing a false alarm.
belt is fastened correctly, it means that
go to the GAC Motor authorized shop
for inspection in time.
WARNING
Never insert the substitute of seat belt
tongue into the buckle to eliminate the
seat belt alarm.
: Rear seat belt indicator lamp*
If rear seat belt indicator lamp is on in white,
it indicates that the seat belt is fastened, and
if the indicator lamp is on in red, it indicates
faulty. If the indicator lamp stays red after the
seat belt is fastened correctly, it means that
GAC Motor authorized shop for inspection in
time.
The rear seat belt indicator lamp is on for 35 s
and then goes out in normal cases, and it will
light up under the following conditions:
- The rear passenger does not fasten the
seat belt when the engine starts.
- The rear passenger does not fasten the
closed.
- The rear passenger fastens or unfastens
the seat belt.
3.2.2 Seat belt
Seat belt indicator lamp
: Driver’s seat belt indicator lamp
: Front passenger’s seat belt indicator lamp
The following alarms will be triggered when the
vehicle power switch is set to “ON” position:
- If the driver or front passenger does not
fasten the seat belt at a speed lower than
in the instrument cluster will flash for
about 6s and stay on, accompanied by an
alarm message.
- If the driver or front passenger does not
fasten the seat belt at a speed higher than
indicator lamp in the instrument cluster
will flash for about 20s and stay on,
accompanied by an alarm message and a
continuous audible alarm.
To Next Page
Loading...
