GAC MOTOR EMPOW - Intelligent High Beam

231
5. Driving guide
WARNING
● Thesound insidethevehicleorthe
noise outside the vehicle may prevent
you from hearing the warning sound,
so there is no guarantee that you can
be reminded of the alarm given by
theLKAunderanycircumstances.
● LKAdoesnotalwaysrecognize
lane markings and lane edges. The
system may wrongly identify or even
don’t identify a lane marking or a
lane edge due to bad weather, poor
night lighting, water or snow on road,
damaged or blurry lane markings,
or shade on roads. As a result, there
may be missing triggering and false
triggering of the function. Therefore,
the driver must concentrate on
observing the road and traffic
conditions and drive carefully.
5.4.8 Intelligent high beam*
The IHC detects traffic and environmental
factors in real time through an IFC on the
upper edge of the windshield, and can achieve
automatic switching between the low beam
and the high beam. For example, if the driver
activates the IHC during driving on a road
with poor lighting at night, the system will
switch on the high beam automatically when
it is detected that the operating conditions of
high beam are met; the system will switch the
headlamp from high beam to low bean when
the vehicle meeting or too close following
driving is detected.
WARNING
IHC is a driver assist function, and it
can help you to select the lighting way
best suitable for the actual condition.
The driver shall always be responsible
for manual switching between the high
and low beams under the traffic and
environmental conditions.
● IHCmaynotcorrectlyidentifyall
driving environments and may
not work properly under certain
circumstances.
● IftheIFCisshieldedbydirt,stickers,
ice, snow and etc., the IHC may not
work.
● Ifthevehiclelightingsystem
is changed (for example, the
modification of the headlights), the
IHC may also be degraded or not
work.