GAC MOTOR EMPOW - Rear Approach Alert System

241
5. Driving guide
5.4.12 Rear approach alert
system*
The rear approach alert function monitors the
target directly behind the vehicle in real time

the vehicle. When the driver drives the vehicle
normally on the road and there is a target
rapidly approaching in this lane behind, the
system will send out an alarm message and a
rear-end collision warning signal to the vehicle
behind.
CAUTION
The rear approach alert function is only
for assist and cannot replace the driver
to monitor the external traffic conditions.
The driver should always be alert to the
surrounding environment..
OnandO󰀨
When the vehicle power switch is in the
  

Assistance”, select “Rear approach alert
system”, and press the right
soft button to
󰀨
NOTE
The system has the button state memory
function, so that when the vehicle is
restarted, the system will work at the state
before last shutdown.
How it alerts the driver
The rear approach alert function automatically
activates and quickly flashes the hazard
warning lamps to alert the rapidly approaching
vehicles behind.