133
5. Driving guide
5.1.1 Ignition switch
ENGINE START/STOP button*
Only when the intelligent remote control key
is detected in the vehicle can the ENGINE
①
.
5.1 Starting and driving
When the gearshift lever of an AT model is
in “P” or “N” position and the brake pedal is
indicator lamp will turn green. At that time,
start the engine.
With the brake pedal not depressed, press the
indicator lamp goes out, and the ENGINE
indicator lamp turns orange, and the
circuits of accessories such as vehicle
inlet are connected.
indicator lamp turns orange, the
instrument cluster backlight comes on,
and the circuits of all electrical consumers
are connected.
NOTE
in “ON” position, when the transmission
gearshift lever is in a position other
than “P” and the brake pedal is not
STOP button to switch it from “ON”
position to “ACC” position. If pressed
and held, it will be switched in the
than return to “OFF” position.With the
position, when the transmission gearshift
lever is shifted to “P”, the ENGINE
return to “OFF” even if it is not pressed.
With the gearshift lever in “P” position,
is switched from “OFF” to “ACC” and
remains in “ACC” position for one hour,
the vehicle will enter the battery saver
button will automatically return to “OFF”
position.
5. Driving guide
To Next Page
Loading...
