EasyManua.ls Logo

GAC MOTOR GS4 - Page 144

Default Icon
273 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
138
5. Driving guide
WARNING
Do not shift the gearshift lever to “R”,
“N” or “P” during forward driving,
otherwise the transmission may be
damaged or even an accident may
occur.
P: Parking position
- When the vehicle is stationary, press the
unlock button in the front of the gearshift
lever to set the gearshift lever to “P”
position.
- Depress the brake pedal and press
the unlocking button in the front of the
gearshift lever to move the gearshift lever
out of “P” position.
CAUTION
After set to “P” gear, the gearshift lever is
locked. Do not pull the gearshift lever hard,
for fear of damaging the vehicle.
R: Reverse position
- When the vehicle is stationary, depress
the brake pedal, and press the unlock
button in the front of the gearshift lever to
set the gearshift lever to “R” position.
- Release the brake pedal and slowly
depress the accelerator pedal to reverse
the vehicle.
CAUTION
When the gearshift lever is set to “R”, make
sure that the vehicle is stopped completely
and the engine speed is not high, otherwise
the transmission may be damaged and
even an accident may occur.
N: Neutral position
- Depress the brake pedal and press
the unlocking button in the front of the
gearshift lever to set the gearshift lever
from “P” to “N” position.
- Directly put the gearshift lever in the “N”
position to set the gearshift lever from “R”
or “D” position to “P” position
- Depress the brake pedal to set the
gearshift lever from “N” position to “P”
or “R” position; when the gearshift lever
is about to be set to “D” position, it is
unnecessary to depress the brake pedal.
WARNING
Do not make the vehicle coast with
the gearshift lever in “N” position.
Otherwise, it is likely to cause an
accident.
D: Forward position
The gearshift lever is usually set to this position
during normal driving.
- Set the gearshift lever directly from “N”
to “D”. With the gearshift lever in this
position, the system will automatically
upshift or downshift according to the
engine load and vehicle speed.
- Set the gearshift lever directly from “S” to
“D”.

Table of Contents

Related product manuals