GAC MOTOR GS4 - Electric Park Brake (EPB)

144
5. Driving guide
WARNING
● Thebrakefluidmustbechanged
every two years. If the brake fluid
stays in the brake system for a long
period, air resistance may occur in
the pipeline during braking, reducing
the braking effect significantly and
impairing driving safety; it may even
cause failure of the brake system,
resulting in accidents!
● Ifanon-standardfrontspoiler is
installed or the spoiler is damaged,
itwillblockthecoolingairowtothe
brake, causing the brake to overheat
anddeterioratingthebrakinge󰀨ect.
The driver can apply or release EPB by
operating the EPB button. On slopes, HSA can
be used. If the accelerator pedal is depressed
when the vehicle is parked, the EPB will be
automatically released to provide driving
assistance for the driver.
CAUTION
The EPB uses a fixed force to brake the
vehicle according to the gradient.
  
down, the EPB will automatically
increase the braking force.
  
after the braking force is automatically
increased, please depress the brake
pedal, drive the vehicle to a level road
and stop it. Contact the GAC Motor
authorized shop for inspection in time.
Apply the static park brake
- When the vehicle is stationary, pull up
the EPB button
①
till the button indicator
lamp and the indicator lamp
on the
instrument cluster come on, indicating
that the EPB has been applied to prevent
slide.
- When the gearshift lever is switched to
the “P” gear, the EPB will be applied
automatically.
5.2.2 Electric park brake (EPB)*