148
5. Driving guide
To ensure safety, under the following
conditions, the active AUTO HOLD function
will be disabled and the parking brake will be
locked:
1. The engine is shut down;
2. The driver’s door is opened or the seat
belt is unfastened when the vehicle is
stopped.
3. The AUTO HOLD button is pressed to
disable AUTO HOLD.
CAUTION
When driving into a mechanism such as a
vehicle washing device that transports the
vehicle through a conveyor belt, the AUTO
HOLD function must be disabled, otherwise
the vehicle cannot move or deviates from
the path.
EPB self-learning
In some cases (for example, upon sudden
battery failure or after long-term stop), the
indicator lamp
will flash in red, and EPB
will not work when the EPB button is pulled
up manually.At this time, please depress the
brake pedal, press and then pull up the EPB
button, so that EPB button indicator lamp does
to restore its normal operation.
5.3 Electronic service brake
system
5.3.1 Electronic stability program
(ESP)
Electronic stability program (ESP) can
OnandO
ESP is on by default when the vehicle is
running.If the button
is pressed and held for
a certain period of time (3-10s), the ESP will be
deactivated, and the indicator lamp
on the
instrument cluster will come on and an alarm
message will be displayed.
To Next Page
Loading...
