153
5. Driving guide
Operational button
1. : exiting the cruise control.
2.
acceleration.
deceleration.
Enabling of cruise control
- If the
button is pressed, the cruise
control will be enabled, and the white
indicator lamp in the instrument cluster
will come on.
h.
indicator lamp
on the instrument
cluster will turn green, and the vehicle will
enter the cruise control status.
Exiting cruise control
The cruise control can be exited as follows:
- depressing the brake pedal.
- pressing the
button (to exit the cruise
control, but keep the set vehicle speed).
- pressing the
button (to exit the cruise
control and clear the set vehicle speed).
- pulling up the EPB button.
- starting the ESP system.
- set the gearshift lever to “N” position.
Resetting of cruise control
In case of the activated cruise control system,
the
indicator lamp on the instrument
cluster will become white when the system is
deactivated, and the cruise control can be re-
- When the vehicle speed is higher than
the
indicator lamp in the instrument
cluster will turn green from white, and the
vehicle speed will return to the value set
during the last cruise control.
Increasing the cruising speed
button is pressed, the vehicle speed
which the vehicle speed will continue
increasing until the button is released.
NOTE
When the vehicle speed is lower than 40
To Next Page
Loading...
