176
5. Driving guide
The active brake assist function of the
pedestrian detection system is covered by
deactivate the function, refer to the section on
the AEB system. => See page 172
In order to activate this function accurately, it
is necessary to obtain accurate information on
pedestrians.
WARNING
The driver shall be fully responsible
for the safety of the vehicle because
this function cannot detect pedestrians
under all conditions.
PDS fault indication
If the pedestrian detection function is faulty, the
instrument cluster will display the message alert
“Pedestrian detection function is not available” to
the driver.
NOTE
cannot overcome the limitations of some
physical conditions, the functions cannot
be fully achieved when the vehicle runs
in the speed range specified by the
system. Therefore, the driver shall be
responsible for timely applying effective
braking. Whether the pedestrian detection
system shall issue an alarm or whether the
pedestrian detection system shall brake
or avoid pedestrians with the help of the
brake pedal is contingent on practical
conditions.
rely on the pedestrian detection system
to completely avoid accidents or serious
injuries.
(such as curved main roads), the
pedestrian detection function may
response to some targets of similar shape
or size with pedestrians by unnecessarily
issuing some alarms or unnecessarily
intervening in braking.
NOTE
When the pedestrian detection function
is faulty, for example, due to inaccurate
be unwanted alarms or interventions in
braking.
If the pedestrian detection function
activates braking, the driver will feel
hard while depressing the brake pedal.
When the driver depresses the
accelerator pedal or turns the steering
wheel, the automatic braking activated
by the pedestrian detection function is
interrupted.
When the system gives an alarm, the
system may have no time to help the
driver in avoiding a collision.
If the pedestrian detection function
has the anomalies other than those
described above (for example, the
function has been activated abnormally
for many times), please deactivate the
pedestrian detection function and go
to the GAC Motor authorized shop for
inspection in time.
To Next Page
Loading...
