186
5. Driving guide
Radar sensor
The radar sensors are installed in the middle of
the grille under the front bumper to monitor the
at a certain distance from the vehicle.
A radar sensor must be adjusted and calibrated
under the following conditions:
- The fixing bracket of the radar sensor is
- The toe-in or rear wheel camber has been
adjusted during the four-wheel alignment;
- The vehicle has a collision.
NOTE
direction changes, please deactivate the
functions dependent on the radar (e.g.,
to go to the GAC Motor authorized shop
for recalibration in time.
changed due to vibration, for example,
when the part near the front bumper
or a bumper bumps against something.
Changing the direction of the sensor
may affect the performance of the
functions dependent on the radar or
even lead to abnormal shutdown of the
system.
on the sensor with a brush and to
remove the ice on the surface of the
sensor with the insoluble de-icer spray.
NOTE
the license plate frame, or the bumper
area, at which the radar ins installed,
is covered by any foreign matter such
as heavy rain, ice, snow, mud, the
functions dependent on the radar sensor
may not work and the instrument-related
indication. The functions can return to
foreign matters.
bumper of the vehicle may change the
direction of the radar sensor, which may
affect the functions defendant on the
radar. Thus, it is recommended to go
to the GAC Motor authorized shop for
repair in time.
To Next Page
Loading...
