14
3. Instructions for safe operation
CAUTION
there are any heavy objects on the front
passenger’s seat to avoid the system
mistakenly determining that the seat is
occupied and issuing a false alarm.
belt is fastened correctly, it means that
the SRS is failed. In that case, please
go to the GAC Motor authorized shop
for inspection in time.
WARNING
Never insert the buckle into the
substitute of seat belt tongue to eliminate
the seat belt alarm.
: Rear seat belt indicator lamp*
If rear seat belt indicator lamp is on in white, it
indicates that the seat belt is fastened, and if
the indicator lamp is on in red, it indicates that
the seat belt is fastened or the SRS is faulty. If
the indicator lamp stays red after the seat belt
is fastened correctly, it means that the SRS
is failed. In that case, please go to the GAC
Motor authorized shop for inspection in time.
The rear seat belt indicator lamp is on for 35s
be lighted up under the following conditions:
- the rear seat belt is not fastened when the
engine starts.
- the rear seat belt is not fastened when the
- the rear passenger fastens or unfastens
the seat belt.
Seat belt pretensioner and load limiter
The seat belt pretensioner and load limiter can
reduce the pressure of the seat belt on the
chest of the driver or passenger and improve
the protection performance.
- At the beginning of the vehicle collision,
the seat belt pretensioner and load limiter
can restrain the occupant and enable him
or her to maintain a correct sitting posture
to prevent the body from leaning forward.
- In the event of a severe collision where
the triggering condition is reached, the
seat belt pretensioner and load limiter will
be triggered, driving the seat belt webbing
to be quickly retracted and tensioned.
To Next Page
Loading...
