196
5. Driving guide
5.5.3 Around view monitor (AVM)*
The AVM consists of one control unit and four
180° cameras. The control unit collects the
left, right, front and back images of the vehicle
and integrates them into a 360° bird’s-eye
view of the surrounding environment, which is
displayed on the AV system display to provide
the driver with information on the surrounding
environment of the vehicle and to reduce blind
spots during driving. In addition, it can take
the parameters such as steering wheel angle
and vehicle dimensions into consideration
to predict the vehicle’s motion trajectory as
well as superimpose the predicted track on
the panoramic image to provide the driver
with full information on the vehicle’s direction
of traveling, helping the driver to determine
whether it is safe to reverse.
OnandO
1. In case of the ignition switch set to
the “ON” position, the system can be
lever:
- Set the gearshift lever to “R” position, and
the AVM is activated automatically.
- When the gearshift lever is moved out of
the “R” position and the driver do not carry
out any relevant operation, the AVM will
be deactivated automatically after 30s.
2. In case of the ignition switch set to
the “ON” position, the system can be
- Short press button
①
, the button
indicator lamp lights up, which indicates
that the system has been activated.
- Short press button
①
again, the
button indicator lamp goes out, which
indicates that the system has been
deactivated.
NOTE
AV system display shows the image
around the vehicle and some reversing
guidelines.
deactivated.
“R” position and the system has been
activated for more than 30s, the system
will be automatically deactivated (when
the speed is zero).
activated, the AVM cannot function
properly.
To Next Page
Loading...
