GAC MOTOR GS4 - Page 227

221
6. In-service maintenance
WARNING
● Beextremelycarefulwhenworkingin
the engine compartment. Be sure to
read and follow the relevant warning
instructions carefully before starting
work.
● Donotmisusecoolantor anyother
additivesaswindshieldwasheruid.
Otherwise, oil stains will be left on
the windshield during cleaning of
the windshield, which will affect the
visibility and easily cause accidents.
● Itisforbiddentousewindshield
washer fluid with more than 10%
ethanol content. In high temperature
environment, this type of windshield
washer fluid will cause corrosion
and even crack of tail lamps. It is
recommended to use methanol
washeruid.
Replacing front windshield wiper blades
- Switch the ignition switch to the “ON”
position and then to the “OFF” position.
- Move the wiper combination switch to the
“MIST” position within 10 s. The wiper arm
will stop after running for half a circle.
- Lift the wiper arm, turn and press the
wiper blade (as shown) downwards to
remove it.
- Install the new wiper blade into the wiper
arm in reverse steps. It is installed in
place when a “click” is heard.
- Gently put the wiper arm back into the
windshield.