228
6. In-service maintenance
CAUTION
air gun, it can not be cleaned and needs
to be replaced in time after getting dirty.
material, it shall neither contact water
nor be washed with water. Otherwise,
dust will accumulate and form clots,
which will cause decreased air volume
②
, install it
②
.
6.6 Replacing bulb
Instructions for replacing bulbs
When replacing bulbs, be careful not to touch
of the bulb will evaporate the grease on the
lamp.
After replacing bulbs, be sure to check the
working status of lamps, and go to the GAC
Motor authorized shop to check the beam
status in time.
NOTE
and LED types. If the LED bulb is
damaged, please go to the GAC Motor
authorized shop for replacement.
the left and right bulbs are basically
the same. Here only the removal and
refitting methods of halogen bulbs on
one side are described.
To Next Page
Loading...
