28
3. Instructions for safe operation
3.4.4 Installing the child safety
seat correctly
The child safety seat is installed by three-point
seat belt, ISOFIX system, or LATCH system.
the headrest from affecting the performance
of the child safety seat during use, it is
recommended to remove the headrest of the
seat on which the child safety seat is installed.
NOTE
During the actual installation of the
child safety seat, be sure to refer to the
instruction of the child safety seat for
correct installation.
Installation of child safety seat by three-
point seat belt
1. Place the child safety seat on the rear
seat.
2. Pass the seat belt through the child safety
seat and fully insert the tongue into the
buckle until a click is heard.
Tab
3. Push the tab down. Then, pass the
shoulder belt through the slit on the side
of the child safety seat.
To Next Page
Loading...
