48
4. Operation of systems and equipment
Symbol Meaning Color Trigger condition
30
Rear seat belt indicator lamp *
White If the white indicator lamp comes on, it indicates that the rear seat belt is fastened.
Red
If the red indicator lamp comes on, it indicates that the rear seat belt is not fastened or the
seat belt system is faulty.
31
Intelligent high beam indicator lamp *
White If the white indicator lamp comes on, it indicates that the intelligent high beam is activated.
Yellow If the yellow indicator lamp comes on, it indicates that the intelligent high beam is faulty.
32
High beam indicator lamp Blue If the blue indicator lamp comes on, it indicates that the high beam is on.
33
IMMO indicator lamp* Red
If the red indicator lamp comes on, it indicates that the engine immobilizer system or the body
anti-theft system is working.
34
Position lamp indicator lamp Green
If the green indicator lamp comes on, it indicates that the position lamp, instrument panel
lamp, license plate lamp, ambient light, etc. are on.
35 Front fog lamp indicator lamp* Green If the green indicator lamp comes on, it indicates that the front fog lamp is on.
36 Rear fog lamp indicator lamp Yellow If the yellow indicator lamp comes on, it indicates that the rear fog lamp is on.
37
Hill descent control (HDC) indicator
lamp
Yellow If the yellow indicator lamp comes, it indicates that the HDC system is activated.
38
White
does not control the longitudinal and lateral directions of the vehicle.
Green
control the longitudinal and lateral directions of the vehicle simultaneously, or the horizontal
control may be suppressed currently.
39
indicator lamp
White
If the white indicator lamp comes on, it indicates that the accumulated carbon of the GPF
exceeds a certain limit, and it is necessary to run at a high speed for more than 40 minutes to
clean the carbon.
Yellow
If the yellow indicator lamp comes on, it indicates that the accumulated carbon of the GPF is
excessive, and it is necessary to go to the GAC Motor authorized shop for cleaning.
Note: If any indicator or warning lamp appears in the instrument cluster after the vehicle is started or during driving, it indicates that the related
system or function is in a certain working state or faulty. You should read carefully and understand the meaning of each indicator or warning
lamp. In case of a fault, please go to or contact the GAC Motor authorized shop for inspection in time.
To Next Page
Loading...
