59
4. Operation of systems and equipment
It should be noted that the intelligent active
lock function will not be activated in case of the
followings:
- The ignition switch is in “ACC” or “ON”
position.
- The intelligent remote control key is in the
vehicle.
- No intelligent remote control key is
detected within 2 m of the vehicle.
- Any door (excluding the liftgate or engine
hood) is ajar.
- The intelligent remote control key is
thrown into the vehicle from the door
window.
- The intelligent remote control key is too
close to the vehicle.
CAUTION
cannot automatically close the door
windows, so before leaving the vehicle,
make sure that all door windows and the
sunroof are closed.
persons in the vehicle alone when using
the intelligent active lock function.
PEPS system*
the “OFF” position, if you bring the intelligent
remote control key to approach the vehicle
doors and put your hand into the (unlocking
area) inside the front door handle, all the doors
the “OFF” position, if you take the intelligent
remote control key from the vehicle, close all
the doors and touch the groove (locking area)
on the front door handle as arrowed, all the
CAUTION
the doors, please wait for 5 s before
using it again to unlock the doors.
areas at the same time, priority will
be given to the unlocking function, so
please do not touch them at the same
time.
door handle, the PEPS function will be
as soon as possible.
intelligent remote control key is within
the effective range during heavy rain
or vehicle washing, the doors may be
unlocked.