GAC MOTOR GS4 - Page 68

62
4. Operation of systems and equipment
Unlocking liftgate with button on instrument
panel*
Press and hold the liftgate button on the
instrument panel to open the liftgate to the
maximum (or the set position => See page
63 ) automatically.In this process, if you
press this button, the liftgate will stop opening.
NOTE
When the liftgate is opened in this case, the
  
will sound intermittently.
Powerliftgate(PLG)mainswitch*
The PLG main switch is located in the glove
box. Open the glove box:
- To activate the PLG function, turn the
main switch
①
to the “ON” position.
- To deactivate the PLG function, turn the
main switch
①
to the “OFF” position.
OpenPLG*
- The PLG can be opened when the vehicle

ClosePLG*
- The closing of the PLG is not limited by
the vehicle speed.
- The PLG can be closed only after the pull-
in lock catch is released.
NOTE

check whether the PLG main switch is in
the “ON” position. If it still fails with the main
switch in the “ON” position, please go to the
GAC Motor authorized shop for inspection
in time.