To Next PageTo Next Page
Need help?Do you have a question about the Gage Bilt GB150 and is the answer not in the manual?
General| Model | GB150 |
|---|---|
| Type | Pneumatic Rivet Tool |
| Air Pressure | 90 PSI |
| Handle Type | Ergonomic |
| Capacity | Up to 1/4" Rivets |
| Air Consumption | 4 CFM |
| Material | Aluminum |
The GB150 can be operated between 0°F - 118°F (-17.8°C / 47.8°C).
Addresses operator discomfort, posture, and symptoms during tool use.
Focuses on risks associated with using approved accessories and tool disconnection.
Covers slips, trips, falls, and hazards in unfamiliar or explosive atmospheres.
Warns about hearing loss from high noise levels and the need for protection.
Details risks of vibration exposure to hands/arms and preventative measures.
Chart for selecting blind rivet nose tips based on part number and size.
Step-by-step guide for installing blind fasteners using the GB150 tool.
