Coupling Alignment Gage Operation Manual
Copyright © 2016 Gagemaker. All rights reserved
10
Maintenance Tips
• Keep all unprotected metal surfaces coated with light oil.
• Avoid dropping the gage or subjecting it to any vibration or impact.
• Keep the gage dry and away from any machine coolant spray.
• Do not force the movement of any of the mechanical parts. The mechanics are designed to
move freely.
• Keep the indicator face clean.
Warranty Information
Gagemaker warrants its products to be free from defects in material and workmanship under normal
operating conditions for 12 months from the date of shipment. This warranty is limited to repairing, or at
Gagemaker’s option, replacing any product which is proven to have been defective at the time it was
shipped and/or suffered damage during shipping; provided buyer has given Gagemaker written notice of
any such claimed defect within 15 days of receipt. Any defective product must be properly packed and
shipped to the Gagemaker factory in Pasadena, Texas USA. This warranty applies to all products when
used in a normal industrial environment. Any unauthorized tampering, misuse or neglect will make this
warranty null and void. Under no circumstances will Gagemaker or any affiliate have any liabilities for loss
or for any indirect or consequential damages. The foregoing warranties are in lieu of all other warranties
expressed or implied, including but not limited to, the implied warranties of merchantability and fitness for
a particular purpose.
Products Requiring Repair or Calibration Return Process
1. Prior to sending any products to Gagemaker, please call 713-472-7360 and request a
Returned Material Authorization (RMA) number from Sales.
2. Include a Purchase Order or work instructions with the returned product.
3. Return to: Gagemaker LP
712 East Southmore Ave.
Pasadena, TX 77502-110
To Next Page
Loading...
Need help?
General
