Need help?Do you have a question about the Gaggenau CK 590-615 and is the answer not in the manual?
Details the 180mm SuperQuick cooking zone with 1800W power.
Describes the 140mm SuperQuick zone, 1100W, switchable to enlarged 2000W.
Details the SuperQuick zone with automatic high-heat function, Ø 120mm (750W) to Ø 210mm (2200W).
Describes the warming plate on the right (150W) and left (300W) with dimensions.
Identifies individual residual-heat indicators for hot plates.
Mentions pilot lamps for warming plates.
Covers key installation requirements, regulations, and safety for the ceramic hob.
Provides guidance on troubleshooting, checking fuses, and contacting authorized service agents.
Specifies minimum clearance distances between the cooking surface and surrounding cabinets.
Instructions for checking the appliance for transport damage after unpacking.
Details on preparing the work top cut-out, including spacing for other appliances.
Instructions for drilling holes in the work top for securing retaining brackets.
Steps for applying waterproof sealant and securing retaining brackets to the work top.
Procedure for inserting the hob into the cut-out and aligning it correctly.
Steps for bolting down the appliance and connecting it to the control panel.
A note warning against using silicone to fix the hob into the work top.
To Next Page
General
