• 36 •• 36 •
18 Turn the selector switch to the “ ”
central position.
19 The
“ ” light turns on and the water
tank must be removed before entering
the next stage.
Empty the container under the steam
wand and the one under the dispensing
spout.
20 Remove the water tank, rinse it and
ll it up to the “MAX” level with fresh
drinking water.
21 Place an empty container under the
steam wand and another one under
the dispensing spout.
22 When the “ ” and “ ” lights start
blinking, turn the selector switch
clockwise to the “ ” position. The
second rinse cycle is started.
If the tank is not lled up to
the MAX level, the cycle must
be repeated from point 17.
23 When the second rinse cycle is over,
the machine enters the stand-by mode
and the “ ” button starts blinking.
Empty the container under the steam
wand.
17 When there is no more rinsing water
left in the water tank, the “ ” , “ ”
and “ ” lights blink simultaneously.
16 When the “ ” and “ ” lights start
blinking, turn the selector switch
clockwise to the “ ” position;
in this case, the steam/hot water
wand dispenses the rinsing water
continuously.
15 When the “ ” , “ ” and “ ” lights
start blinking at the same time,
turn
the selector switch to the “ ” central
position.
The machine starts rinsing directly from
the dispensing spout.
4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 36 14/10/2020 14:49:23
To Next Page
Loading...
