Gaggia Sup 037RG - Control Panel Display Guide; Ready and Warning Signals

• 38 •• 38 •
• The machine is performing the rinse
cycle.
Wait until the machine stops the
operation.
• The machine needs a descaling cycle.
• The machine needs water circuit
priming.
Warning Signals
• The machine is warming up to brew
coee and dispense hot water or steam.
CONTROL PANEL
DISPLAY
Ready Signals
• The machine is ready for brewing coee
from bean and hot water dispensing.
• The machine is ready for pre-ground
coee brewing.
• The machine is in the steam dispensing
phase.
• The machine is in the hot water
dispensing phase.
• The machine is brewing 1 espresso
coee or a long coee.
• The machine is brewing 2 espresso
coees or 2 long coees.
• The machine is programming the
amount of coee to be brewed each
time the “ “ or “ “ button is
pressed.
Steady on
Steady on
Steady on
Blinking
Steady on
Blinking
Cyclic blinking
Steady on
Steady on
Steady on
Blinking
4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 38 14/10/2020 14:49:27