Gaggia Sup 037RG - Coffee Brewing Problems and Leaks

• 41 •
Machine Actions Causes Solutions
Coee is brewed slowly.
(see note)
The coee grind is too ne. Change coffee blend or adjust the grind as
explained in the “Coee Grinder Adjustment”
section.
The circuit is not primed. Prime the circuit (section “Using the Machine
for the First Time”).
The brew group is dirty. Clean the brew group (section “Brew
Group”).
Coffee leaks out of the dispensing
head.
The dispensing head is clogged. Clean the dispensing head and its holes.
Note: These problems can be considered normal if the coee blend has been changed or if the machine has just been installed.
In this case wait until the machine performs a self-adjusting operation as described in section “Gaggia Adapting System”.
Please contact Gaggia Customer Service or an authorized service center for any problems not covered in the above table or
when the suggested solutions do not solve the problem.
4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 41 14/10/2020 14:49:28