Gaggia Unica - Installation and Initial Setup

• 27 •
English
INSTALLATION
For your safety and the safety of oth-
ers, carefully follow the instructions
provided in the "Safety Regulations"
section.
Packaging
The original packaging has been designed
and constructed to protect the machine
during transport. We recommend keep-
ing the packaging material for possible
future transport.
Preliminary Operations
• Remove the drip tray with grill from the
packaging.
• Remove the co ee machine from the
packaging and position it in a place
that meets the requirements described
in the safety regulations.
• Place the drip tray with grill into its
appropriate seat on the machine. Make
sure it is fully inserted to its limit stop.
Note: Insert the plug into
the socket on the back of the
machine.
Important Note: Carefully
read the explanatory descrip-
tions of all the warnings the machine
displays to the user via the lights on
the control panel display (see section
"Display Warnings").
Before removing the drip tray,
wait a couple of minutes after
turning on/o , as the machine will be
carrying out a rinse/self-cleaning cy-
cle (see section "Rinse/Self-cleaning
Cycle").
• Remove the water tank from its place.
• Rinse and  ll it with fresh water mak-
ing sure that it is not  lled exceeding
the (MAX) level indicated in the tank.
Put the tank back in its place.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
operate the machine if water is not
present: Make sure there is enough
water in the tank.
• Remove the co ee bean hopper cover.
Note: The hopper may be pro-
vided with different safety
features according to the regula-
tions of the country of use of the
machine.
• Slowly pour the co ee beans into the
hopper.
Only coffee beans must be
put into the co ee bean hop-
per. Ground co ee, instant co ee or
any other object may damage the
machine.
• Replace the co ee bean hopper cover.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!