Gaggia Unica - Coffee Brewing Process; Brewing Coffee Using Beans

• 32 •• 32 •
Dispensing Spout Adjust-
ment
Most cups on the market can be used with
this co ee machine.
The height of the dispensing spout may
be adjusted to better  t the dimensions
of the cups that you wish to use.
Manually move the dispensing spout up
or down to adjust its height by placing
your  ngers as shown in the  gure.
The recommended positions are:
For the use of small cups;
COFFEE BREWING
Note: Should the machine not
brew co ee, make sure that
the water tank contains water.
Before brewing co ee check
the lights on the display and
make sure the water tank and co ee
bean hopper are full.
Leave the knob on the “ ”
position during the brewing
phase.
Before brewing co ee, adjust
the height of the dispensing
spout according to your needs.
Using Coff ee Beans
• To brew co ee, press and release:
the “
” button for an espresso cof-
fee;
the “
” button for a long co ee.
• The brewing cycle then starts:
To brew 1 cup of co ee, press the “
”
or “ ” button once. This icon will be
displayed.
To brew 2 cups of co ee, press the “ ”
or “ ” button twice. The display will
show this icon.
To brew 2 coffees, the ma-
chine automatically grinds
and doses the correct amount of
co ee. Brewing two co ees requires
two grinding cycles and two brewing
cycles, which the machine carries out
automatically.
• After the pre-dispensing cycle, co ee
begins to come out of the dispensing
spout.
Steady on
Steady on
Steady on
For the use of large cups.
• Two cups/mugs can be placed under
the dispensing spout for brewing two
co ees at the same time.