Need help?Do you have a question about the Gait up Physilog 5 and is the answer not in the manual?
General| Connectivity | Bluetooth |
|---|---|
| Water Resistance | IP67 |
| IMU | 9-axis |
| Accelerometer Range | ±16 g |
| Gyroscope Range | ±2000 °/s |
| Magnetometer Range | ±4900 µT |
| Data Storage | 8 GB |
| Wireless Communication | Bluetooth Low Energy |
Instructions on how to charge the Physilog®5 sensors using a USB cable.
Default sensor configuration for PhysiRun Lab and how to check/change it.
How to update the internal time of sensors for correct file organization.
Guides on attaching Physilog®5 sensors to shoes using rubber clips or elastic straps.
Importance of a static period for sensor calibration during measurements.
Steps to start and stop measurements using the watch via Bluetooth.
How to initiate and stop measurements directly from the Physilog®5 sensors.
Instructions for connecting sensors and saving recorded data files to a computer.
How to open the PhysiRun Lab software and load recorded data files.
Guide to manually or automatically selecting periods for calibration and analysis.
Guidelines for careful handling, cleaning, storage, and disposal of Physilog®5 sensors.
Information on battery safety, charging precautions, and power supply requirements.
Information on LED indications, error types, and how to perform a soft reset.
To Next Page
