Galanz GLR10TBKF - User Notifications; Cleaning Precautions; Post-Maintenance Checks; Troubleshooting Tips

6
7
8
5
Number
Parts
Shelve
Crisper glass cover
Vegetable crisper
Rod
Cola bar
Bottle protector
Owner's manual
3pcs
1pcs
1pcs
4pcs
2pcs
2pcs
1pcs
9
Climate class
Electric shock protection type
Capacity (cu.ft)
Freezer
Freezer
Refrigerator
Voltage (V)
Frequency (Hz)
Current (A)
Voice [dB(A)]
Energy consumption (kW.h/24h)
Refrigerant
Weight (lbs)
Interior
temperature ( F)
Dimension (inch)
Width
Depth
Height
Refrigerator
o
T
I
115
60
1.2
R600a/1.41oz
123.5
32~46.4
<
45
0.9
7.52
23.58
25.71
59.72
2.47
<
5
Please get rid of the gasket of the door before the disposal.
The disposed apparatus should be handled by professional
staff, as it may be harmful to the environment.
Warning
Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3) Is the plug heating unconventionally?
4.
USER NOTIFICATIONS
Do not splash water on the refrigerator, as it will cause oxidation and malfunction.
Electronic component such as on/off button should be wiped dryly.
Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical
cloth, thinner, alcohol, acid petroleum productand hot water should not be used to
clean the refrigerator as they may damage the painted cover and plastics.
Smear can damage the interior plastic component, so wipe it as soon as possible.
1.
2.
3.
In a general condition, do not stop the appliance in case of affecting
its life. After unplugging the power, please leave at least 5 minutes
before resumption.
Attention
Stop using
If the refrigerator may be stopped using for a long time, please unplug the outlet and
clean up the appliance. The door should be kept open in order to prevent unpleasant
smell caused by food leavings.
3.
DISCONNECTING THE APPLIANCE
Discontinuation during power failure
After power failure, do not put additional food in the appliance and reduce the frequency
of door opening.Make several ices in a container if know the power failure beforehand,
and put it in the top of the fridge.
Discontinuation during vacation
Please fetch out the easy-rot food and the food in fridge before shot vacation. After
confirmation, close the door firmly.If have a long vacation, please fetch out all the food
and cut off the power. After defrosting, clean up the liner of the appliance and wipeit dry,
and leave the door open.
1.
2.
After power failure, even in summer, the refrigerator can store food normally in several
hours.
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluent if necessary.
MAINTENANCE
1.
2.
3.
DEFROST
Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer
Defrost of refrigerator will be executed automatically during product running, so it
is no requirement for manual defrost. The defrost water flows into the vaporization
plate and will be vaporized by the heat of compressor. So its drain tube must be cleaned.
Warning
Heavy frost occurs on the rear of the appliance
Putting humid or hot food into the appliance may cause this problem. Or it may be
caused by the heavy environment moisture.
Disgusting odour happens
Food with strong odour should be packed tightly before being put inside the appliance.
Please check whether there is any deteriorated item or whether the liners are left dirty
for a long time.
Water leaks from the bottom of the refrigerator
The drain tube is jammed. Please use a proper tool to solve it.
5.
6.
7.
The compressor keeps working for a long period
The environment temperature may be too high. The doors may be opened frequently
or even they are left open. The temperature control knob setting in (4-5) state may
increase the working time of compressor.
4.
TROUBLESHOOTING TIPS
The refrigerator work
It may not be connected to the power supply(plug, power cut or fuse); Voltage is too
low.
does not
The refrigerator does not work efficiently as expected
It may be caused by heavy frost, or by warm temperature setting,or by frequently door
operating.
It makes unusual noise
It may be caused by an imbalance or loose ground locating the appliance, or by
resonation between the appliance and other ambient objects.
1.
2.
3.
The follow cases are not malfunction
Moisture may form dew on the outside of the product during the humid season, just
get it wiped.
The frame of the appliance will be warm during working by the defrost pipeline inside it.
Please check the points above first.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
The flow of refrigerant through the pipeline coil can cause a bicker.
It is normal that the sides of product get warm as a result of the cooling pipeline working.
1.
2.
4.
3.
PLACEMENT OF FOOD
OPERATION INSTRUCTIONS
There should always be some space between items inside for air circulation.
Food should be to avoid becoming
dry or with odour.
kept in sealed package
Hot food sho uld be coole d do w n before pla cing into th e
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
Do not use any electronic equipment inside the appliance.
Warning
1.
2.
3.
4.
REFRIGERATOR CONTROL
INSTRUCTION FOR USAGE
The temperature of refrigerator can be controlled manually by the display.
However, the number shown on the display does not directly represent the
temperature. Instead, the larger the number is the lower the interior
temperature will be. Initially set the refrigerator control on the middle
setting(number 3). If you want to set the refrigerator temperature to a
coulder temperature pressing the set button until the state on 4 or 5. Each
time the set button is pressed, the state increases by 1. When the state is in
the highest state, press the button again and return to the first state.
FREEZER CONTROL
If the refrigerator ’s lower tempreature is needed, please regulate the konb along
the“COLDER”direction;contrarily, regulate the konb along the COLD”direction.
Note: Regulate the konb to set the freezer temperature as you desire. Always wair
24 hours after any adjustment to reach the desired temperature.
“
SPECIFICATIONS AND PARAMETERS
PACKING LIST
Note: Products are
subject to improve
from time to time, any
changes in parts
without further notice.
10