Galax Pro 78221 - Assembly and Setup; Inserting and Replacing Saw Blades

.05.
Owner’s Manual & Safety Instructions
JIG SAW
Voltage & Frequency:
Input Power:
No Load Speed:
Max. cutting depth:
220-240V~ 50Hz
600W
0-3000SPM
Wood:80MM
Steel:6MM
b.Technical Specifications
c.Function Description
7.Assembly
: Before any work on the machine itself, keep the mains plug
out of the supply.
Inserting/Replacing the Saw Blade
a.Pull the lever of the blade clamp and slide the saw blade into the groove as far
as it will go with the blade teeth pointing forward.
b.Make sure that the lug of the blade fitted into the blade clamp, then release
blade clamp lever.
c.Check if the saw blade has been fastened firmly and correctly.
1.Lock-on Button
2.Trigger Switch
3.Hex Wrench
4. Laser Button
5. Saw Blade
6. Vacuum Adaptor Hose
7. 4-stage Cutting Action
8. 6 Stage Speed Adjustor
9. Soft Grip
10. Quick Release Saw Blade
Changing System
WARNING
8 9
1
6
7
2
4
3
10
5