22
6.2 Blinking Alert for Low Batteries
When the batteries are low, a blinking battery icon will appear on the
display. In this condition there is still limited
energy left in the batteries to operate the valve,
and the batteries must be replaced as soon as
possible. After the replacement, press one of
the buttons to continue the operation of the
controller.
The batteries can be replaced in 30
seconds without losing the program data.
6.3 Steady Alert for Low Batteries
When the batteries are low and are not replaced in time, the battery icon
will appear steadily. All other displays will
disappear, all valves will close and programs
will disappear. Replace the batteries as soon as
possible and reprogram the controller.
Note: The batteries can be replaced in 30
seconds without losing the program data.
During manual operation using the irrigation
controller, ‘No Prog’ will appear on the display,
which means that the duration of the irrigation
for this valve has not been programmed.
In this situation it is not possible to open the
valve.
6.4 Missing Definition in the Irrigation
Program
Note: To resume the valve operation, set the duration as
described in Section 4.4