Galcon G.S.I DC - Page 21

G.S.I DC Installation and Operation Guide
20
Figure 27: Main Screen
Press  to cycle through the following information displays on the Main
screen:
Current time (hh:mm format)
Flow value currently detected by the flow sensor (in m
3
/hr).
Notes:
 Until the flow sensor is defined using the G.S.I Web User
Interface, this screen does not display actual data.
 When there is no water flow, the flow value should be zero.
If it is not, contact Galcon Support.
Current voltage of the controller’s battery
Last four digits of the controller unit’s 16-digit serial number
Current firmware version number
Batteries
Condition
Irrigation in
progress
Station no
irrigating
Synchronizing
data
Communication
Master
valve open