G.S.I DC Installation and Operation Guide
21
The Main screen is the launching point for all other G.S.I. controller
operations. It displays the following information depending on the
circumstances:
By default – Displays the current time (hh:mm format) and a list
indicating the number of irrigation stations which are currently
connected to the controller.
During irrigation – Displays a icon below the station which is
currently irrigating, as well as the amount of time remaining until
that irrigation finishes.
If more than one station is currently irrigating, the icon is
displayed for each of them. In addition, a icon is displayed below
one of those stations and the time displayed applies for that
station.
Optionally press to cycle through the following information:
Current program number
Current water flow
Current time
Fertilizer meter
Batteries status
Press again to return to the main irrigation screen which displays
the current irrigation program countdown.
In addition, on the left side of the screen, an icon indicates which screen
you are currently viewing according to the list of screens printed on the
unit.
To Next Page
Loading...
