Galcon S Series - Valve in Wait Mode

5. Additional Displays a
5.1 Valve in Wait Mode
This section does not apply to the
DC-1 Model.
When two valves are currently open, and
a third valve is scheduled to open, the third
valve enters into wait mode. A blinking
appears above the number of the waiting
valve. When one of the first two valves
closes, the waiting valve opens. During 6056 - DC 6s
"manual" operation of a waiting valve via
the irrigation controller, the letter "W" (Wait)
appears on the display. The valve opens
when another valve closes.
20