Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
15
2.6 PACKING, TRANSPORT AND LIFTING
The machine can be delivered with or without packing.
If it is delivered with packing, mount the curtain (see par. 6.5).
When the machine is not attached to the tractor, it can be raised by means
of a crane, using the pull eye bolt as shown in the label attached to the
machine.
For raising the machine use safety hooks and
suitable cables to be mounted as indicated by labels.
Mod. FR/D e P-FR/D Mod. SP-FR/D
ATTENTION
!
During lifting make sure that the machine is with
the cutter bar in the horizontal position.
Alternatively, place the machine on wooden pallets and raise it with a forklift.
Lifting of the machine shall be performed by skilled staff.
To Next Page
Loading...
