Galfre P-FR/D 210 - 4.2 CHECK LIFTING AND STABLE OPERATION OF THE TRACTOR

Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
28
4.2 CHECK LIFTING AND STABLE OPERATION OF THE TRACTOR
For lifting and stable operation of the tractor refer to the following formula.
Additional tractor front ballast may be needed.
Z
M
sid
0,2 T
T
M X s < 0,2 T X i + Z (d + i)
M < 0,3 T
i = Wheelbase tractor
d = Distance between front axle and ballast
s = Distance to the rear axle of the machine
T = mass of the tractor + 75 kg (operator)
Z = Mass of ballast
M = Mass of the machine
ATTENTION!
Check lifting and stable operation of the tractor in
order to avoid upset and/or loss of adherence to the
road.