Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
30
With FR/D models, which are not equipped with this mechanical locking
system, make sure that after raising the mowing unit to the transport
(vertical) position the shear pin (A) is properly secured in the hole as shown
in the picture.
All machines are equipped with the hydraulic locking device, In addition to
the mechanical device, operate the hydraulic locking device (B) by means of
the tap on the flexible hydraulic hose connected to the hydraulic couplings
(quick couplings) on the tractor.
To Next Page
Loading...
