Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
41
It is recommended to select a speed between 10 and 15 km/h. Anyway,
speed shall depend upon the kind of terrain.
During working avoid turns with the machine lowered to the ground and do
not drive the tractor in the reverse motion.
Before changing direction and turning raise the mower and disengage
power takeoff.
Hard working conditions, for instance rough terrain, require a slower
speed.
5.1
SAFETY RELEASE DEVICE
If an obstacle is hit the safety release device allows the cutter bar to swing
back, thus providing shock absorption.
Stop engine and disengage power takeoff of the tractor. Before reinstalling
the safety device reverse the car for 2 metres.
Before resuming operation check adjustment of the safety release device and
make sure that cutter components have not been damaged.
Safety release device
To Next Page
Loading...
